/ 23 /
Pump-Reservoir
Combo Unit
UNI Bracket
Washer M4 x 0.8
M4 x 4 Screw
STEP 1
INSTALLING THE PUMP-RESERVOIR UNIT
ON THE CHASSIS BOTTOM
STEP 1
The KIT comes with a combined pump and reservoir unit with
preinstalled anti-vibration holder.
Take the unit and place it on the UNI Bracket vertically, as shown on
the picture.
Turn your pump in any direction, as long as it is not turned
upside-down.
Secure it from the back side using four M4x10 screws and PVC
washers. Tighten them in the clockwise direction using the enclosed
2,5mm Allen key.
This unit can be installed anywhere where there is a
105x105mm rectangular mounting hole pattern on the
chassis, without using any pump brackets.
For detailed instructions on how to install
the Pump-Reservoir unit, scan the QR code
on the Pump-Reservoir packaging box.
