- 10 -
STEP 2
M2.5 x 4 AX1
SCREW
M2.5 PVC WASHER
STEP 2
To mount the graphics card onto the waterblock, stock cross
backplate needs to be use. Attach it with five (5) M2.5 Washers and
M2.5 X 4 AX1 screws.
STEP 3
STEP 3
Install 1.0mm thick thermal pads on the PCB, as illustrated below
to ensure better connection between graphic card and backplate.
EK made sure to provide you with more than an adequate quantity
of thermal pads to complete this Step.
Thermal Pad F 1.0 mm