- 12 -
- 13 -
ATTACHING THE FITTINGS
INLET
(One must be used)
OUTLET
EK-Plugs
G1/4
EK recommends you use the EK-Quantum Torque
fittings with EK-Quantum Kinetic TBE VTX series
combo units. If you opt for barbs, make sure that tubes
are securely attached using the hose clamps or an
appropriate substitute.
All unused ports should be blocked with enclosed
G1/4 plugs.
CAUTION:
The OUTLET port must always be placed on the marked spot.
Ports on the top of the reservoir should only be used as
INLET ports with the enclosed Internal tube.
The INLET (suction) ports are those with the G1/4
threading plane.
Make sure not to use fittings or barbs longer than 5mm
with the G1/4 thread!