- 4 -
PREPARING THE GRAPHICS CARD
STEP 1
REMOVING THE FACTORY-PROVIDED BACKPLATE
Remove all encircled screws using a Phillips head screwdriver.
All heat sink assembly screws should be removed, including self-
adhesive washers on both sides of the PCB (if present).
STEP 2
REMOVING THE STOCK COOLER
Remove all encircled screws using a Phillips head screwdriver (4
springs) and a 4mm hex socket. All heat sink assembly screws
should be removed, including self-adhesive washers on both sides
of the PCB (if present). After the removal of housing, do not forget
to unplug the fans.
STEP 1
STEP 2