- 4 -
PREPARING YOUR GRAPHIC CARD
STEP 1
REMOVING THE FACTORY BACKPLATE
Remove all 9 encircled screws using a Phillips head screwdriver, then
take off the backplate and XO clip.
STEP 2
REMOVING THE STOCK COOLER
Remove both encircled screws using a Phillips head screwdriver.
STEP 1
STEP 2
STEP 3
REMOVING THE STOCK COOLER (CONTINUED)
Remove the remaining 15 screws as shown below. The cooler
can now be gently removed, take care to unplug the LED and Fan
connections. If there are any self-adhesive washers on either side of
the PCB these should also be removed.
STEP 3