EN
12
SAFETY INSTRUCTIONS
• The product is only intended for outdoor use.
• Switch off the power supply before installation.
• Before cleaning, maintenance and/or other work on the
product, switch off the power supply by removing the fuse or
pulling out the plug.
• Products with transformers must only be used with the
original transformer.
• Do not allow children to play with the packaging material or
the product.
• These instructions should be enclosed with the product if it is
sold or passed on.
• Do not connect the lamp to the mains while it is still in the pack.
• Stop using the product immediately if it gets damaged,
especially the power cord, plug and/or lamp socket, and if it
is not working properly.
• Repairs must be carried out by an authorised electrician.
• Never attempt to modify or repair the product. Repairs that
are not carried out correctly can result in a risk of serious
personal injury and/or death.
• The product’s earth wire (green/yellow) is connected to earth.
• Be careful not to damage the insulation on the wires during
installation. Make sure that the wires do not come into
contact with sharp edges. Damaged insulation can result in
a risk of electric shock.
• Check that the mains voltage corresponds to the rated
voltage on the type plate.
• The plug, power cord, wires and connections must not be
subjected to mechanical stress.