6
Number
Button
Function
1
Once connected the PC to the FA 524 power supply through
the USB-USB cable, press this button in order for the power
supply to identify the modules connected to it. Once
activated, the blue logo is displayed
2
This icon will be displayed in blue with white lettering once
the connection is established with the headend. If not, it will
be otherwise the white logo with blue lettering which will be
displayed, making it then necessary to press button 1 again.
3
Through the FA 524 it is possible to carry out a remote
connection with a headend and to that end this button is
used. The remote connection is explained below. If
displayed in blue the remote connection is activated, and if
white it is not activated.
4
Firmware updating. Press this button to load a file to update
the firmware of the modules.
5
Press this button to switch off the FA 524 power supply of
the operation of the various modules of the headend. If it is
disconnected, the logo will be displayed in white and blue
lettering.
6
This option enables one to load a configuration program
previously saved on the PC. The configuration file will have
the .dtc extension
7
This option enables saving on the PC a programming
configuration of a module to be subsequently loaded using
button 6. A .dtc format file will be created.
8
Enables changing the output of the DVB-T (COFDM)
modules to DVB-C (QAM).
9
Data-logger. Enables saving the data of the different
modules of the headend.
The main screen of the "CM management" enables to easily identify the different modules
connected to the power supply, as can be seen in the following screen:
