EKOM DK50 2V/50/M, User Manual

Page: 38 / 220

INSTALLATION
NP-DK50 2V 50, 2x2V 110-AD-A-1_03-2022 38 03/2022
Fig. 13: Connect the cabinet to the compressor
13. PLACEMENT OF THE COMPRESSOR IN THE CABINET
13.1. DK50 2V/50S/M (Fig. 4-A)
Removal of cabinet door

Remove the door held by 2 screws and disconnect the display connector and the earthing lead.
Check to ensure the display connector is removed prior to removing the front
door as otherwise it could be damaged.
Compressor placement

Remove the connecting strip (17) in front of the cabinet.

Position the compressor within a distance of at least 500 mm from the cabinet to facilitate the
movement of the hoses and the power cord within the cabinet (Fig. 14).