EKOM DK50-10 Series, User Manual

Page: 21 / 120

INSTALLATION
10/2019 21 NP-DK50-10-A-4_10-2019-MD
Fig. 7: Connection of condensate collection vessel

Route the hose through the opening in the rear wall of the cabinet for compressor models with a
dryer and connect it to the vessel.
Risk of damage to pneumatic components.
Air hoses must not be broken.
12. ELECTRICAL CONNECTION

The product is delivered with a cord equipped with a plug with earthing pin.

Keep the socket easily accessible to ensure that the device can be safely disconnected from the
mains.

The corresponding circuit must be protected in the power distribution max. 16 A.
Risk of electric shock.
It is necessary to follow all local electrotechnical regulations. The mains voltage
and frequency must comply with the data stated on the device label.
Risk of fire and electric shock.
Electrical cable must not be in contact with hot compressor components.
Risk of fire and electric shock.
Electrical cord must not be broken.
DK50-10S/M compressor cabinet, variant 10 bar, is equipped with a cooling fan
and a switch. The cabinet must be connected using the cord with a connector to
a connector at the compressor electrical box. (Fig. 3)
12.1. Connecting a compressor not installed in a cabinet

Insert the mains plug into a rated mains socket.

The compressor is ready for operation.