16
DOLBY ATMOS
MUST USE A HDMI 2.0 CABLE, OTHERWISE DOLBY ATMOS WILL NOT WORK.
When playing DOLBY ATMOS signals from a Blu-Ray, consoles or others to
the DOLBY ATMOS Soundbar, please follow below:
1.
Set the devices audio output to be AUTO or ORIGINAL.
2.
Connect these devices HDMI OUT (ARC) to the SOUNDBAR
HDMI IN port.
3.
Connect other end of HDMI into the TV HDMI ARC port.
4.
By following these steps, you will now be able to control your
Soundbar, Power ON/OFF and control other functions.
-
When your Soundbar is in HDMI mode and detects an DOLBY
ATMOS audio format being played, DOLBY ATMOS will display on
the soundbar.
-
When DOLBY DIGITAL PLUS audio is detected, the soundbar LED
Display will show DOLBY SURROUND.
IMPORTANT:
-
NO SOUND - FLASHING LED LIGHT
In HDMI ARC or Optical Input and there is no sound output from the
unit and the LED indicator light on soundbar is flashing, you may
need to adjust your TV Audio settings to either PCM or Dolby Digital
Signal on your TV.
-
This unit may not be able to decode all digital audio formats
from the input source. In this case, the unit will be mute.
This is NOT a defect.
IF YOUR TV DOES NOT SUPPORT DOLBY ATMOS, THEN YOU MUST PLUG
YOUR DOLBY ATMOS SUPPORTED MEDIA PLAYER OR CONSOLE INTO THE
SOUNDBAR DIRECTLY, WITH ONE OF THE HDMI (IN) PORTS.
PLEASE REFER TO PAGE 13 (HDMI PORTS - HOW TO USE)
Summary of Contents for KSB202DA
Page 2: ......
Page 19: ...19 ...
Page 20: ...CUSTOMER HELPLINE info ayonz com DISTRIBUTED BY Ayonz Pty Ltd ...
