11
must be able to visually an adequate braking distance between vehicle and the front vehicle, and he
must remain in control of his vehicle. Sudden stop (unless urgent needs), rapid U-turn, chased each
other in the Aisle is not allowed.
3.5.15 Visibility:
The driver must look attentively at the direction of driving, to ensure the front
situation is clearly visible. When the vehicle is backing off, if the carriage of goods block the line
of sight, a second person walk in front of the vehicle to give appropriate guidance and warnings is
necessary.
3.5.16 Pass through the ramp:
Only a known ramp which should be clean, non-slip, and with the
vehicle technical availability was allowed to go through. The goods on the forks must face uphill.
It is forbidden to turn back, move diagonally or park on the ramp. The operator must slow down
when going through the ramp, and prepare to brake at any time.
3.5.17 Load capability on ground:
when the vehicle is in operation, make sure the load pressure
of the body weight or wheels on the ground does not exceed the load capacity of the ground .
3.5.18 Vehicle Change:
Any possible changes or modifications for rated load, stability or safe
operation of the vehicle, must obtain prior written approval from origin manufacturers or its
successor. After vehicle manufacturer check and approve the changes, nameplates, labels and
markings of Operation and Maintenance Manual must be modified as well.
4.Maintenance
4.1 Maintenance procedures
Maintenance technician:
The maintenance and service should only be performed by special
