3
72
90
45
70
5
25
20
20
bus KNX
EK-AB1-TP
Power supply 640 mA
230 V~
50/60 Hz
I
≤ 640 mA
30 V
+ 45 °C
~
=
1
2
3
L
N
ON
I > I
max
Disposal
At the end of its useful life the product
described in this datasheet is classified
as waste from electronic equipment in
accordance with the European Directi-
ve 2002/96/EC (RAEE), and cannot be
disposed together with the municipal
undifferentiated solid waste.
Documentation
This datasheet refers to the release A1.0 of the ekinex
®
device EK-AB1-TP, and is available for download at www.
ekinex.com as a PDF (Portable Data Format) file.
DQEKAB1TP
File name
Device release
Updating
STEKAB1TP_EN.pdf
A1.0
07 / 2014
Warnings
• Installation, electrical connection, configuration and
commissioning of the device can only be carried out by
qualified personnel in compliance with the applicable
technical standards and laws of the respective countri-
es
• The power supply line to which the device is connected
must be equipped with an easily accessible disconnec-
ting device with minimum separation distance between
contacts of 3 mm
• Opening the housing of the device causes the imme-
diate end of the warranty period
• In case of tampering, the compliance with the essential
requirements of the applicable directives, for which the
device has been certified, is no longer guaranteed
Dimensions [mm]
Marks
• KNX
• CE: the device complies with the Low Voltage Directi-
ve (2006/95/EC) and the Electromagnetic Compatibility
Directive (2004/108/EC). Tests carried out according
to EN 50491-2:2010, EN 50491-3:2009, EN 50491-4-
1:2012, EN 50491-5-1:2010, EN 50491-5-2:2010, EN
50428:2005 + A1:2007 + A2:2009
Maintenance
The device is maintenance-free. To clean use a dry cloth.
It must be avoided the use of solvents or other aggressive
substances.
• ekinex
®
KNX defective devices must be returned to the
manufacturer at the following address: EKINEX S.p.A.
Via Novara 37, I-28010 Vaprio d’Agogna (NO) Italy
Other information
• This datasheet is aimed at installers, system integra-
tors and planners
• For further information on the product, please contact
the ekinex
®
technical support at the e-mail address:
[email protected] or visit the website www.ekinex.
com
• Each ekinex
®
device has a unique serial number on
the label. The serial number can be used by installers
or system integrators for documentation purposes and
has to be added in each communication addressed to
the EKINEX technical support in case of malfunctioning
of the device
• KNX
®
and ETS
®
are registered trademarks of KNX As-
sociation cvba, Brussels
© EKINEX S.p.A. The company reserves the right to make changes to this
documentation without notice.
Warning! Incorrect disposal of this product may
cause serious damage to the environment and hu-
man health. Please be informed about the correct
disposal procedures for waste collecting and pro-
cessing provided by local authorities.
!
