User Guide • PC1-GROOVE • Core
TM
i7
CompactPCI
®
CPU Board
Loading UEFI BIOS Setup Defaults (P-GP)
The jumper P-GP is used to reset the UEFI BIOS configuration settings to a default state. The UEFI BIOS
on PC1-GROOVE stores most of its settings in an area within the BIOS flash, e.g. the actual boot
devices. Using the jumper P-GP is only necessary, if it is not possible to enter the setup of the BIOS. To
reset the settings mount a jumper on P-GP and perform a system reset. As long as the jumper is
stuffed the BIOS will use the default configuration values after any system reset. To get normal
operation again, the jumper has to be removed.
P-GP
Function
Jumper OFF
1)
Normal operation
Jumper ON
BIOS configuration reset performed
1)
This setting is the factory default.
Manufacturer Mode Jumper (P-MFG)
The jumper P-MFG is used to bring the board into the manufacturer mode. This is necessary only on
board production time and should not used by customers. For normal operation the jumper should
be removed.
P-MFG
Function
Jumper OFF
1)
Normal Mode
Jumper ON
Manufacturer Mode
1)
This setting is the factory default.
2)
P-MFG is not stuffed.
1
P-GP
1
P-MFG
© EKF -55- ekf.com
