EK R2, User Manual, Page: 11 / 18

DMX CHARTS - 86-channel mode
26
86 CH Function Value Percent/Se tt ing
1 Pan 000 -255 0~100 %
2 Pan Fine 000 -255 0~100 %
3 Tilt 000 -255 0~100 %
4 Tilt Fine 000 -255 0~100 %
5 Dimmer 000 -255 0~100 %
6 Dimmer Fine 000 -255 0~100 %
000 -005 Strobe open
006-010 Strobe closed
011 -033 Pulse Random,slow to fast
034 -056 Ramp up Random, slow to fast
057 -079 Ramp down Random, slow to fast
080 -102 Random Strobe Effect, slow to fast
103 -127 Strobe Break Effect, 5s…..1s (Short burst with break)
128 -250 Strobe slow to fast (1Hz - 20Hz)
251 -255 Strobe open
8 Red1 000 -255 0~100 %
9 Green1 000 -255 0~100 %
10 Blue1 000 -255 0~100 %
11 White1 000 -255 0~100 %
12 Red2 000 -255 0~100 %
13 Green2 000 -255 0~100 %
14 Blue2 000 -255 0~100 %
15 White2 000 -255 0~100 %
… … … …
80 Red19 000 -255 0~100 %
81 Green19 000 -255 0~100 %
82 Blue19 000 -255 0~100 %
83 White19 000 -255 0~100 %
7 Strobe
11
DMX STARTING ADDRESS
To set the starting address of each xture:
ï Press the ENTER button and use the UP/DOWN buttons to scroll the menu
ï Select the DMX ADDRESS menu and press ENTER
ï Use the UP/DOWN buttons to scroll to the preferred address value
ï Press ENTER to con rm the chosen DMX address
ï Press the MENU button to save changes and exit
EXAMPLE OF DMX ADDRESSING
The below table shows an example of starting addresses for four xtures
assuming a rst xture with starting address of 001.
The actual starting addresses will be determined by the operator as needed to
match external controller settings.
DMX ALLOCATION
1st
Fixture
1 channels 001
2nd
Fixture
3rd
Fixture
4th
Fixture
01 033 049 6 7