- 5 -
STEP 3
Final Installation
Attach the metal plate with pre-assembled EK-Loop Connect on to
the case.
STEP 3
CONNECTING THE FAN-S
The controller is compatible with 4-pin PWM Fans, 3-pin Fans may
be used however it will not be possible to adjust the speed. Insert
the 4-pin Fan connectors as shown below to the 6 Fan headers
marked F1-F6.
Fan Splitters may be used to connect multiple Fans to one
header. EK recommends the use of Splitters with separate power
connectors for 4 or more fans. Do not connect splitters in series!
FAN
headers
4-Pin PWM FAN
connector
FAN header