ITS Partner O.B.S S.L · Av. Cerdanyola 79-81 Local C
08172 Sant Cugat del Vallés · Barcelona (Spain)
Phone: +34935839543 · [email protected] · www.ek.plus
5
USER MANUAL
MD HD EASY RC
Installation diagram:
1 y 2- They are used to configure.
3.- Connects to the facility (for
receivers).
4.-RF signals are input.
5.- The built-in power supply is
connected and plugged into the
current.
6.-Connects to pc if necessary, to
set up with MD HD SOFT app.
7.-It connects the signal you
want to modulate.
8.-The video you want to
interleave is connected.
9.- LOOP from HDMI IN.
10.-In case that you needed; the
IR extender could be connected .
The two TRC allow the STB to be controlled. One of them is fed to 5V directly from the MD HD EASY
RC because there is current pass between them. The second TRC requires its FA 505 source because
TAP does not allow current flow.*TRC not included
