ITS Partner O.B.S S.L · Av. Cerdanyola 79-81 Local C
08172 Sant Cugat del Vallés · Barcelona (Spain)
Phone: +34935839543 · [email protected] · www.ek.plus
CM 8SH CI-TC
USER MANUAL
Flow: Adjustment of the data transfer rate to the output:
As a general rule, we will set the FTA (Free To Air) modules to 160Mbps.
Example flow calculation: 31668Mbps x 4 = 126672 Mbps - The value above would be 160 Mbps.
IMPORTANT:
If the CI (Common Interface) is used, in any of its two slots, the maximum speed specified by the service
provider to leave the flow at the appropriate value must be taken into account,
as all the selected flow will be delivered through the CAM regardless of whether it has to be encoded
or not.
Remote head-end management:
The CM head-end can be managed remotely. This function is integrated in the
and in each of the head-end modules. To do so, a CM KEY (
code) must be available.
Each CM KEY is associated with a single power supply and will only enable remote management of
that power supply. The installer will provide the Power Supply identifier to ITS Partner when
requesting the CM KEY.
Each installer company, in either event, will have a unique Software ID and Key which will be supplied
together with the
Software ID: Installer/Installer Company Identifier.
Key: Installer/Installer Company Identifier.
ID: Power Supply Identifier (MAC).
KEY: CM KEY supplied.
