- 10 -
CONNECTING THE D-RGB LED STRIP
Plug the 3-pin connector from the Monoblock’s D-RGB LED light to
the
D-RGB Header
on the motherboard. The LEDs will work if the pin
layout on the header is as follows:
+5V, Data, Empty, Ground
.
D-RGB Header
RGB Header
STEP 2
For the MSI Z590 Pro Carbon monoblock to operate properly, the G1/4
port nearest to the right edge of the water block
MUST BE USED AS
THE INLET PORT
.
STEP 2
IMPORTANT:
Use this opening
as the Inlet Port!
