- 8 -
M4 x 62 SCREW
D5 COVER
PUMP
CABLES
ATTACHING THE PUMP COVER
STEP 1
Insert the pump cables through D5 Pump cover and place the cover
over D5 pump. Make sure that holes are aligned. Secure the D5
Pump cover using M4 x 62 mm screws and 2.5 mm Allen Key. Do not
use excessive force while tightening the screws!
STEP 1
STEP 2
INSTALLING THE MOLEX CONNECTOR
1. Put the screwdriver into pin gap in Molex connector
2. Recover flattered pin into original position
3. Put cables back to Molex connector and fan connector(Watch out
for correct order of cables)
STEP 2
1. PUT THE
SCREWDRIVER
INTO PIN GAP
2. RECOVER THE PINS
ORIGINAL
POSITION
WATCH OUT FOR CORRECT
ORDER OF CABLES
