6
Attaching the Product
Attention
• To use the UX2 Sensor, you need to install RadiCS in advance. For details, refer to the RadiCS User's
Manual.
• Wipe any dust, water droplets, dirt, etc. off the monitor screen before attaching the UX2 Sensor.
• If the adsorptive sheet is dusty or dirty, wipe it before attaching the UX2 Sensor.
• Do not forcibly press the UX2 Sensor against the monitor. Doing so may cause a display error such as
interference patterns appearing on the monitor.
Connect the USB cable to the USB downstream port of the PC and the USB upstream port of the monitor.
1. Connect the USB connector of the UX2 Sensor to the USB downstream port of the PC or
monitor.
When the PC recognizes the UX2 Sensor, the LED indicator of the UX2 Sensor lights up blue.
2. Turn the protective cap and remove it from the UX2 Sensor.
