Raptor 4000 Series: Reference Manual
©2009 Tech Source Inc.
23
Part #65-0271-01
In the example below, the sections related to Screen0 and
Screen1 are provided. To change the resolution on Screen1
(head1), the new resolution will need to be specified to the
Modes
option in the
Screen
section.
Section "Device"
Identifier "Rapafp0"
Driver "rapafp"
BusID "PCI:17:0:0"
Card "TSI Raptor 4000"
Option "Device" "/dev/rapafp0"
Option "Mode" "24"
Option "ScaleCursPos" "on"
Screen 0
Option "Head" "0"
# Option "DDCCheck" "off"
# Option "Rotation" "+r"
# Option "Sync" "sx"
# Option "BackingStore"
# Option "SaveUnder"
# Option "TranspColor" "0x0a3246"
EndSection
Section "Screen"
Identifier "Raptor4000-0"
Device "Rapafp0"
Monitor "TSI-FP DVI"
DefaultDepth 24
SubSection "Display"
Depth 8
Modes "2048x2048"
EndSubSection
SubSection "Display"
Depth 16
Modes "2048x2048"
EndSubSection
SubSection "Display"
Depth 24
Modes "2048x2048"
EndSubSection
EndSection
NOTE:
If you are using a Raptor 3500e then the
Identifier
will be Raptor3500-0 in the
ServerLayout
Section.
