Package Contents ________________________________
Please contact your local dealer for assistance if any of the listed items are missing or damaged.
Stand
Stand Mouting Cover, 4 pcs
Stoppers for height adjustment (attached to the stand, detachable), 5 pcs
User’s Manual
Sheet (Compatible Screws List)
Mounting Screws, 8 pcs each
(For the compatible screws and monitors, refer to the ‘Compatible Screws List’.)
Note before Use __________________________________
The paperboard is inserted on the stoppers of this stand for the protection of the stand in transport condition.
Remove the paperboard before use. The procedures are as follows.
1.
Detach the bottom one in five stoppers.
2.
Slide down other four stoppers and remove the paperboard.
3.
Reattach the detached stopper.
NOTE
When repacking and transporting the stand, reinsert the paperboard on the stoppers for the protection of
the stand.
2
3
1
How to attach ____________________________________
Use specified screws for tightening up referring to the ‘Compatible Screws List’.
1.
Position the monitor to fit the holes at the rear of the monitor to the shield plate of the stand. Tighten
the two screws at the top as a temporary stop then tighten the rest of screws. (Tighten the two screws at
the top securely after attaching all screws.)
2.
Attach the covers to the shield plate with sliding them rightward or leftward.
Covers
Stopper
1
2
Paperboard