English
How to attach the monitor: LS-H51-D
LS-H32-D
(when attaching the L367)
1.
Remove the original tilt stand.
Lay the LCD monitor down on the soft cloth or cushion and then remove the stand.
(Refer to “Attaching An Arm Stand” section in the monitor’s user’s manual in
details.) When reattaching the original tilt stand, please use the same screws and
tighten them securely.
2.
Attach the LCD monitor and Balance Weight to the stand.
Place the shield plate and balance weight to be straight with the monitor.
NOTE
x
Attaching the LCD monitor to the stand without the Balance Weight may result
in a shift of the monitor’s vertical position.
3.
Attach the covers to the shield plate.
Hold the center of the stand mounting cover and slide them rightward or leftward
to attach them.
4.
Plug the power cord and signal cable into the connectors at rear of
monitor.
After plugging, lead the power cord and signal cable into the cable holder at rear of
the monitors.
NOTE
x
The cable holder enables to hold 2 signal cables by EIZO, a
power cord, 5 USB cables and 2 stereo mini jack cables.
x
The cables are recommended to lead with slight sag for the
smooth motion of the stand.
Covers (Enclosed)
Sheild Plate
Mounting screws(Enclosed)
Balance Weight
Cable Holder
6
Summary of Contents for LS-H32-D
Page 1: ......