Package Contents ________________________________
Please contact your local dealer for assistance if any of the listed items are missing or damaged. Use specified
screws for tightening up between arm, fitting and monitor referring to the back of this manual.
z
Arm
z
User's Manual
z
Fitting
z
Arm Cover x 2 pcs
z
Stand Mounting Cover
z
Hex-head wrench
z
Mounting Screws M4 x 8 (black) x 4 pcs
z
Mounting Screws M4 x 12 (silver/long) x 4 pcs
z
Mounting Screws M4 x 8 (silver/short) x 4 pcs*
*Screws for attaching the monitor with fitting to arm when the monitor’s hole spacing is 100 mm x 100 mm.
Compatible Monitors and Desks ____________________
z
Monitors
Weight Capability*
2.5 kg to 5.5 kg
Hole Spacing
75 mm x 75 mm / 100 mm x 100 mm
(VESA compatible)
*Weight : Total weight of the monitor including the weight of the
cables and optional peripherals.
z
Desks
Weight Capability
50 kg min. (recommended)
Thickness and Depth
Refer to right figure
How to attach the monitor _________________________
More than 38mm
Desk
20~55mm
100mm
100mm
75mm
75mm
M4
M4
1.
Unfold the arm before affixing the arm to the base.
[LA-130-D] [LA-120-D]
(For packing)
(For mounting)
(For packing)
(For mounting)
2.
Clamp the arm to the edge of the desk.
Fit the holes
Desk
Press against
the desk
(1) Press the desk clamp against the edge of
the desk.
(2) Fit the holes on the base of arm to
hex-threaded-hole.
(3) Drive two screw holes by turns with
hex-head wrench. After clamping the
arm, covering the screw holes with Stand
Mounting cover.
NOTE
z
The arm may not affix firmly to the base if driving either screw in tightly.
z
If attaching the LA-120-D, bend the arm slightly forward in advance. Not doing so may scratch the
arm by a hex-head wrench.