English
5. ATTACHING A STAND
The LCD monitor can be used with other stand by removing the tilt stand and attaching
the stand to the LCD monitor.
NOTE
•
If you will use the other stand, confirm the followings to the manufacturers before
selecting.
-
Hole spacing on the stand mounting: 75 mm x 75 mm (VESA compliant)
-
Supportable Weight: Total weight of the monitor (without stand) and attaching
equipment such as a cable
-
TÜV/GS approved stand
•
Please connect cables after attaching a stand.
Setup Procedure
1.
Lay the LCD monitor down. Do not scratch the panel.
2.
Remove the tilt stand by loosening the screws (2 pcs of M4 x 10
mm).
3.
Attach a stand to the LCD monitor securely.
4 Mounting Screws (enclosed): M4 x 12 mm
stand
28
5. ATTACHING A STAND
Summary of Contents for FlexScan L 352T L352T-C L352T-C
Page 43: ......
