Display- [Screen Saver] tab
A connection monitor's Screen Saver and a setup of power-saving control are
[Control Panel]-[Display]-[Screen Saver] tab and set up them by this tab. A power-
saving control setup of the SX1 should use [Turn off monitor].
NOTE
•
Do not use [System standby] setting, since the connection with WTS is cut
when the SX1 shift to system standby. When the SX1 is used again, you
should reconnect to the WTS.
•
The control by using the Network Administrator 3.0 cannot support when the
SX1 is in the “standby” state.
Screen Saver setting
[Screen Saver] .....................Set the screen saver pattern, waiting time (for
activating), and the password to resume the screen
saver (The default is None).
4. Setup the environment of the operation (by the System Administrator)
35