(2) Lay the LCD monitor down on the soft cloth or cushion not to scratch the panel
surface.
(3) Remove the original stand by loosening the screws.
(4) Attach the monitor attachment unit to the monitor securely, by using the screws,
which used for the original stand.
(5) Get back the cover to the monitor attachment unit.
2.
Mount the monitor to the SC1.
(1) Fit the protruding portion of the monitor attachment unit (4 points) to the
attachment position of SC1 (4 points), and insert it in downward, by pressing
down the knob of the monitor attachment unit into the knob position of SC1.
NOTE
•
Monitor mount positions
SC1 has three attachment position (Highest position, Middle position and
lowest position). Please be sure to attach in each position as follows.
•
Refer to the P. 62 for the dimensions figure according to monitor size.
(2) Grip both side of the monitor firmly with both hands and adjust the monitor angle
as desired.
100 mm x 100 mm
For L567, L557, L767
75 mm x 75 mm
For L367
Knob position
Highest position
Lowest position
Middle
position
2. CONNECTING the eClient SC1
11
