8
Chapter 2 Advanced Adjustments / Settings
2-2. Functions of the Main Menu
●
3D
Adjustments / settings for 3D display.
Function
Settings
Description
3D/2D Selection
3D
2D
Switches 3D/2D display.
Signal Format
SIMUL
TOP AND BOTTOM
SIDE BY SIDE
LINE BY LINE
Sets the signal format in 3D mode.
•
“SIMUL”
Displays in 3D mode by inputting left-eye signals from DVI-D 1
or SDI 1 and right-eye signals from DVI-D 2 or SDI 2. Displays in
3D mode by inputting Dual-stream signals (SDI 1 (LEVEL B) or
SDI 2 (LEVEL B)).
•
“TOP AND BOTTOM”
Displays in 3D mode by inputting signals in TOP AND BOTTOM.
•
“SIDE BY SIDE”
Displays in 3D mode by inputting signals in SIDE BY SIDE.
•
“LINE BY LINE”
Displays in 3D mode by inputting signals in LINE BY LINE.
Left/Right Swap
Off
On
Switches the displays of the left-eye signal and the right-eye signal.
H Parallax
-62 to 62
Adjusts horizontal offset of the left-eye signal and the right-eye
signal. If you do not experience a 3D effect, this may be improved by
adjusting the parallax.
V Parallax
-31 to 31
Adjusts vertical offset of the left-eye signal and the right-eye signal. If
you do not experience a 3D effect, this may be improved by adjusting
the parallax.
Attention
•
The settings of “Signal Format”, “Left/Right Swap”, “H Parallax” and “V Parallax” cannot be changed in 2D
mode.
•
When a 4K signal is input in 3D mode, only SIDE BY SIDE and LINE BY LINE signal formats are supported.
Note
• 3D mode indicator (
) is displayed on the upper left of the screen in 3D mode.
