Eizo ColorEdge CG2700X, User Manual

Page: 58 / 77

7 | SDR/HDR Settings
58
Note
• It is recommended to perform "Reset" in "Color" before configuring the settings.
7.3 Settings with ColorNavigator 7
You can use ColorNavigator 7 to configure monitor settings suitable for SDR or HDR
display. It is recommended to use ColorNavigator 7 to calibrate the monitor for the following
cases.
• To perform regular calibration
ColorNavigator 7 has a function to notify when to perform calibration.
• To verify whether the monitor is properly calibrated
ColorNavigator 7 has a function to verify calibration status.
Note
• For more information about how to perform adjustment by operating only the Setting menu of the
monitor, see Setting Procedure [ } 57] .
• For more information about ColorNavigator 7, refer to our web site.
( www.eizoglobal.com/products/coloredge/cn7 )
7.3.1 Setting Procedure
1. Select a color mode in the Setting menu in the monitor.
See step 1 in Setting Procedure [ } 57] to configure the setting.
2. Display "Signal" in the Setting menu of the monitor, and configure the settings required.
See step 2 in Setting Procedure [ } 57] to configure the setting.
3. Start ColorNavigator 7.
4. Point at the color mode selected in the color mode list, right-click, and set the color
mode type to "Advanced".
5. Set the adjustment target according to the application.
For more information, see Target Settings of ColorNavigator 7 [
}
58] .
7.3.2 Target Settings of ColorNavigator 7
-: Cannot be changed
BT.2020 BT.709 DCI-P3 PQ_DCI-P3 HLG_BT.2100
Color Mode Type Advanced
*1
Advanced
*1
Advanced
*1
Advanced
*1
Advanced
*1
Brightness (cd/ ㎡ ) 100 100 48 100 100
White Point D65 D65 D65 D65 D65
Gamma (EOTF) 2.4 2.4 2.6 PQ HLG
PQ Option - - - 300cd/ ㎡
Clipping or
1000cd/
㎡
Emulation
*2
-
HLG Option - - - - Off or
HLG300
*2
HLG System
Gamma - - - - 1.0 or 1.2
*2
Adjustment Method Standard Standard Standard Standard Standard
Color Gamut
(Standard Value) BT.2020 BT.709 DCI-P3 DCI-P3 BT.2020
Gamut Clipping On On On On On