background image

ALC Menu

ALC Mode
ALC Level
Limits
Shutter
Gain

BLC Mode
Detailed 

Full Auto

・・・・・・・

Setup
1/60
0.0dB

Off
Settings

100 



ALC

EXIT

RETURN

ALC Mode
For selecting the method to control the brightness.

Full Auto

The gain, shutter speed and iris are automatically adjusted.

Shut.Prio.

The gain and iris are automatically adjusted and the shutter speed can be adjusted to any setting value.

Gain Prio.

The shutter speed and iris are automatically adjusted and the gain can be adjusted to any setting value.

Manual

The gain and shutter speed can be adjusted to any setting value.

ALC Level
Adjust the convergence value for automatic exposure using the L and R buttons. The greater the value

the brighter it becomes.

Adjust to the appropriate position while looking at the actual image. This is not adjustable when ALC is set

to manual mode.

Limits
Adjust the maximum and minimum values of shutter speed and gain to any setting value during automatic

adjustment.

Shutter
When ALC Mode is set to Shut.Prio. or Manual, use the L and R buttons to adjust any value setting for the

shutter speed.

0

 

1/1, 1/2, 1/4, 1/8, 1/15, 1/30, 1/60, 1/100, 1/125, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 [59.94Hz system]

0

 

1/1, 1/2, 1/3, 1/6, 1/12, 1/25, 1/50, 1/100, 1/125, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 [50 Hz system]

 *

 

There is a margin of error in the displayed value of the shutter speed and the actual control.

Gain
When ALC Mode is set to Gain Prio. or Manual, use the L and R buttons to adjust any setting value for the

gain.

0

 

0 to 78 dB (in step of 0.3 dB)

11

Summary of Contents for carina SSC-9700

































Reviews: