7
Replacing the Batteries
The LEDCure
should be turned OFF.
1. Loosen the screw on the battery door and remove the door.
2. Remove the old batteries.
3. Install two new AAA size alkaline cells, observing polarity. Note: Both cells are installed in the same direction. The proper direction is indicated on the
PCB and on the housing inside the battery compartment. The unit is designed so it will not operate with reversed cells.
4. Replace the door and the screw.
Warranty and Returns
New Product Warranty
EIT Instrument Markets warrants that all goods described in this manual (except consumables) shall be free from defects in material and workmanship.
Such defects must become apparent within six months after delivery of the goods to the buyer.
EIT Instrument Markets' liability under this warranty is limited to replacing or repairing the defective goods at our option. EIT Instrument Markets shall
provide all materials and labor required to adjust, repair, and/or replace the defective goods at no cost to the buyer only if the defective goods are returned,
freight prepaid, to EIT Instrument Markets during the warranty period.
EIT Instrument Markets shall be relieved of all obligations and liability under this warranty if:
1.
The user operates the device with any accessory, equipment, or part not specifically approved or manufactured by EIT Instrument Markets, unless
the buyer furnishes reasonable evidence that such installations were not a cause of the defect. This provision shall not apply to any accessory,
equipment, or part that does not affect the proper operation of the device.
-
SIZE AAA ALKALINE
+
-
SIZE AAA ALKALINE
+
+
