Operating manual
Planetary gearbox
EPL, EPL50X-155X, EPL-Q, EPL-SA, EPL-FE, ESP-L
Date: 02.02.2021
Version 2
6/9
3.2
Lubrication
Grease: Tribol GR100-0PD
Manufacturer: Castrol
Under normal operating conditions, the grease used serves as permanent lubrication based on 15.000 operating
hours or 3 years. If the temperature is above 90°C during continuous operation or if there are very large
temperature fluctuations due to extreme operating cycles, the lubricant change is required after 10.000 operating
hours.
In the event of damaging the shaft sealing rings, resulting in a loss of grease, a factory repair and inspection is
necessary.
3.3
Operating temperature
The operating temperature of the standard gearbox is in the range from -25°C to +90°C. Operating temperatures
above or below the specified range are only permitted with special precautions. Please contact us in these cases.
3.4
Technical data
The technical data of the respective planetary gearboxes can be found in the current product catalog, the technical
datasheet or our website: www.eisele-getriebe.de
4
Delivery and handling
4.1
Delivery condition
The planetary gearboxes are packed in safe and appropriate packaging. Transport damage must be reported to the
shipping company immediately upon receiving the delivery. All packaging materials must be disposed of at the
designated disposal points, the country-specific requirements must be met.
The complete scope of delivery of the planetary gearboxes is noted on the enclosed delivery note. The planetary
gearboxes are to be checked for completeness immediately after receiving the delivery. Please contact us directly
in case of missing or incorrectly delivered parts.
4.2
Transport
The planetary gearboxes do not contain any transport devices. Transport the planetary gearboxes preferably in the
delivered packaging in order to avoid possible transport damage. During the entire transport, it must be ensured
that the permissible storage temperature (see chapter 4.3) is not exceeded and that the packaging is protected
from moisture.
Please note: The planetary gearboxes can be damaged by improper transport, e.g. by putting them down too hard.
A
ttention
!
When transporting and handling the planetary gearboxes, there is a
risk of crushing due to their weight.
▪
Only suitable means of transport and lifting gear may be used for
transport.
▪
Suitable safety equipment, for example, safety shoes and safety
gloves, must be worn.
4.3
Storage
The planetary gearboxes should be stored in the original packaging or in a horizontal position in a dust-free and
dry environment and in a temperature range between -10°C and +40°C. Storing outdoors is not permitted. The
planetary gearboxes can be stored for up to 2 years if these storage conditions are kept.