background image

 

Usage of Hand Control 

The hand control activates the motors in your riser recliner chair which allows you to sit, stand and recline. 

The hand controls for single and dual motor chairs differ in appearance and function. The controls for each 

model of riser recliner chair are illustrated below. Please refer to the relevant instructions for your model 

of riser recliner chair. 

 

Single Motor Riser Recliner Chairs (M1801 - M1802) 

 

To get into the chair 

While standing next to your riser recliner chair, press “Button 1” to raise the riser recliner chair to a height 

you can sit on comfortably with both feet firmly on the ground. This height will vary from person to person. 

When in position and ready, lean against the chair and press “Button 2”. 

As the chair continues downward move yourself into a sitting position. Release the button when the chair 

is firmly set on the floor. 

To control the Backrest / Leg Rest 

Press “Button 2” to first raise the leg rest of the riser recliner chair, you may choose to release the button 

at any time when the leg rest is at the desired angle or raise this part up a full 90 degrees. 

Summary of Contents for Riser M1801










Reviews: