Page 7 of 16
Drawing : - TPC252
Issue
: - 6
Date
: - 10/12/13
SYSTEM INSALLATION
POSITIONING
Position the CD425 in the area leaving enough room either end of the unit to
allow for easy servicing. Using a spirit level ensure the level in both direction.
Failure to do so may result in the drain tray overflowing and flooding of the
chamber.
WIRING
Connect a suitably fused 3 phase mains power supply to the MAINS T/B
terminal block inside the electrical box located at the control panel end of the
machine.
DRAINAGE
Connect the outlet from the drain tray (located behind the front grille and
under the evaporator coils) to a permanent drain.
Please ensure that the drainage does not rise above the level of the CD425’s
drain tray. Failure to observe this requirement will result in internal flooding of
the dehumidifier.
