TESTING YOUR Einstein
Snap the test light onto the contact points as shown in the above
figure. With both units on and green lights flashing, press
the stimulation buttons at Continuous Mode while turning the
stimulation up and down, the test light should brighten as you go
higher in stimulation. The collar receiver light will flicker red while
the stimulation is on. Next, change the mode to
Tapping Sensation
Mode
and press the 1D stimulation button to test the tapping
sensation feature on the collar receiver for Dog 1 and repeat for
Dog 2. Your Einstein E-Collar is ready to use.
21
Einstein Owner's Manual ET-302TS
