EINHELL TC-CS 18 Li Original Operating Instructions Download Page 12

GB

- 12 -

10. Charger indicator

Indicator status

Explanations and actions

Red LED

Green LED

O

 Flashing

Ready for use

The charger is connected to the mains and is ready for use; there is no 

battery pack in the charger

On

O

 

Charging

The charger is charging the battery pack in quick charge mode. The char-

ging times are shown directly on the charger.

Important! The actual charging times may vary slightly from the stated 

charging times depending on the existing battery charge.

O

 On

The battery is charged and ready for use.

The unit then changes over to gentle charging mode until the battery is 

fully charged.

To do this, leave the rechargeable battery on the charger for approx. 15 

minutes longer.

Action:

Take the battery pack out of the charger. Disconnect the charger from the 

mains supply.

Flashing

O

 

Adapted charging

The charger is in gentle charging mode.

For safety reasons the charging is performed less quickly and takes more 

time. The reasons can be:

- The rechargeable battery has not been used for a very long time.

- The battery temperature is outside the ideal range.

Action:

Wait for the charging to be completed; you can still continue to charge the 

battery pack.

Flashing

Flashing

Fault

Charging is no longer possible. The battery pack is defective.

Action:

Never charge a defective battery pack.

Take the battery pack out of the charger.

On

On

Temperature fault

The battery pack is too hot (e.g. due to direct sunshine) or too cold 

(below 0° C).

Action:

Remove the battery pack and keep it at room temperature (approx. 20° C) 

for one day .

Anl_TC_CS_18_Li_SPK7_UKCA.indb   12

Anl_TC_CS_18_Li_SPK7_UKCA.indb   12

08.06.2021   11:34:29

08.06.2021   11:34:29

Summary of Contents for TC-CS 18 Li





















Reviews: