GB
- 20 -
circumstances.
f) Wear suitable work clothes. Do not wear
loose clothing or jewellery. Keep hair, clo-
thes and gloves away from moving parts.
Loose clothing, jewellery or long hair can get
trapped in moving parts.
g) If vacuuming devices and draining de-
vices can be
fi
tted, make sure that these
are correctly attached and correctly used.
The use of a dust extraction system can redu-
ce the danger posed by dust.
4. Usage and treatment of the electric tool
a) Do not overload the appliance. Use the
correct tool for your work.
You will be able
to work better and more safely within the gi-
ven performance boundaries.
b) Do not use an electric tool with a defec-
tive switch.
An electric tool that cannot be
switched on or o
ff
is dangerous and must be
repaired.
c) Pull the plug out of the socket and/or
remove the battery before making any ad-
justments to the appliance, changing ac-
cessories or put the appliance down.
This
safety measure prevents starting the electric
tool unintentionally.
d) Keep unused electric tools out of the
reach of children. Do not allow people
who are not familiar with the appliance or
who have not read these instructions to
use the appliance.
Electric tools are dange-
rous if they are used by inexperienced people.
e) Clean your electric tool carefully. Check
whether moving parts are functioning
properly and not jamming, whether parts
are broken or damaged enough that the
functioning of this electric tool is a
ff
ec-
ted. Damaged parts must be repaired be-
fore using the appliance.
Many accidents
are caused by badly maintained electric tools.
f) Keep your cutting tools sharp and clean.
Carefully maintained cutting tools with sharp
cutting edges will jam less and are easier to
control.
g) Make sure to use electric tools, accesso-
ries, spare parts, etc. in accordance with
these instructions. Take the conditions
in your work area and the job to perform
into account.
Using electric tools for any
purpose other than the one for which they are
intended can lead to dangerous situations.
5. Service
a) Have your electric tool repaired only by
trained personnel and/or the authorized
service agent, using only genuine spare
parts
. This will ensure that your electric tool
remains safe to use.
Special safety information
General safety regulations for this electrical
tool
Danger!
Safety instructions for hand mower
•
Before use, check the mains cable and exten-
sion cable for signs of damage and aging.
•
If the cable is damaged during operation, dis-
connect it immediately from the power supply.
•
Check the machine for signs of damage be-
fore use. Repairs may only be carried out by
our service workshop. If unusual vibrations
occur during use, switch the machine off im-
mediately and pull the plug. Check the cutters
and clean them if necessary. If the machine
continues to vibrate, switch it off, disconnect
it from the mains supply and send it to our
service workshop.
•
The machine must not be tipped whilst it is
being started. Both hands must be on the
handle when you start the machine.
•
Worn parts may only be replaced by our
service workshop. If necessary contact the
service address provided.
WARNINGS
•
Do not use the mower if the connection cable
is damaged or worn.
•
Do not use a damaged cable to connect
the machine to the mains supply and do not
touch a damaged cable whilst it is connected
to the mains. A damaged cable can result in
contact with live parts.
•
Do not touch the cutters until the machine has
been disconnected from the mains and the
cutters have reached a complete standstill.
•
Keep extension cables away from the cutters.
The cutters can damage the cables and result
in contact with live parts.
•
Break the connection with the mains supply
(in other words pull the plug out of the so-
cket):
- whenever you leave the machine unatten-
ded;
- before released a blocked cutter;
- before inspecting or cleaning and before
working on the machine;
Anl_SA_RG_EM_1536_HW_SPK8.indb 20
Anl_SA_RG_EM_1536_HW_SPK8.indb 20
06.04.2017 13:56:50
06.04.2017 13:56:50
