19
GB
home/hobby gardens. Public facilities, sporting halls,
and agricultural/forestry applications are excluded.
Important! Due to the high risk of bodily injury to the
user, the lawn mower may not be used to trim
bushes, hedges or shrubs, to cut scaling vegetation,
planted roofs, or balcony-grown grass, to clean (suck
up) dirt and debris off walkways, or to chop up tree or
hedge clippings. Moreover, the lawn mower may not
be used as a power cultivator to level out high areas
such as molehills.
For safety reasons, the lawn mower may not be used
as a drive unit for other work tools or toolkits of any
kind, unless they have been expressly permitted by
the manufacturer.
The equipment is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user/operator and not the manufacturer
will be liable for any damage or injuries of any kind
which result from such misuse.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
equipment is used in commercial, trade or industrial
businesses or for equivalent purposes.
5. Technical data
Mains voltage:
230 V ~ 50Hz
Power input:
1250 W
Motor speed:
3300 min
-1
Cutting width:
33 cm
Cutting height adjustment:
20-60 mm; 5 levels
Grass basket capacity:
30 liters
LpA sound pressure level:
74.6 dB(A)
LpA at the operator position:
82.5 dB(A)
KpA uncertainty:
3 dB(A)
LWA sound power level:
96 dB(A)
KWA uncertainty:
3 dB(A)
Vibration at the handlebars ah:
≤ 2.5 m/s
2
K uncertainty:
1.5 m/s
2
Protection class:
II /
쏾
Weight:
11.5 kg
Sound and vibration values were measured in
accordance with the standards EN ISO 3744:1995,
EN ISO 11201:1995 and EN ISO 20643:2005.
Reduce noise generation and vibration to a
minimum!
Use only equipment that is in perfect condition.
Maintain and clean the equipment regularly.
Adopt your way of working to the equipment.
Do not overload the equipment.
Have the equipment checked if necessary.
Switch off the equipment when not in use.
Wear gloves and ear protection.
Limit your working time.
Residual risks
Even if you use the equipment in accordance
with the instructions, certain residual risks
cannot be eliminated. The following hazards may
arise in connection with the equipment’s
construction and layout:
1.
Damage to hearing if no suitable ear protection is
used.
2.
Health damage caused by hand-arm vibrations if
the equipment is used over a longer period or is
not properly guided and maintained.
Warning!
This equipment generates an electromagnetic field
during operation. Under certain circumstances this
field may actively or passively impede medical
implants. To reduce the risk of serious or fatal
injuries, we recommend persons with medical
implants to consult their doctor and the manufacturer
of the medical implant prior to using the equipment.
6. Before starting the equipment
The lawn mower is delivered unassembled. The
complete push bar and the grass basket must be
assembled before using the lawn mower. Follow the
operating instructions step-by-step and use the
pictures provided as a visual guide to easily assemble
the equipment.
Fitting the push bar (Fig. 3a to 3d)
Take a bottom push bar (Fig. 2 / Item 3) and fasten it
with the quick clamping function as shown in Fig. 3a.
Proceed in the same way on the other side.
When you fit the top push bar you can decide the
height of the push bar by selecting the appropriate
fastening hole (Fig. 3b). Fasten the top push bar
using either the holes L for a low position or H for a
high position. Screw the top push bar to the bottom
push bar as shown in Fig. 3c. Then attach the power
cable to the push bar (Fig. 3d/Item A) using the cable
clips (Fig. 2/Item 13).
Anleitung_RG_EM_1233_SPK1:_ 21.07.2011 10:28 Uhr Seite 19
