GB
5
A
B
Rotary switch in “Drill” position.
Change switch
position only when the drill is at a standstill!
Rotary switch in “Hammer drill” position.
Change switch position only when the
drill is at a standstill!
Please note:
This switch should be in ‘drill’
position when drilling holes in tiles.
On/Off switch:
To switch on:
Press switch A
Continuous operation:
Lock switch A with
locking button B
To switch off:
Press switch A briefly
The speed is varied by applying more or less
pressure on switch A. You can preselect the
speed by turning the knurled screw in switch A.
Anleitung LE-BM 1010 SPK7 18.05.2006 17:20 Uhr Seite 5
