ONLINE MANUAL
www.einhell.com.au
PRODUCT LAYOUT
ASSEMBLY
GE-DP 7330 LL ECO
1. Float Switch
2. Outlet
3. Handle
4. Pump Housing
5 Locating Lug
6 Intake Cage
SUBMERSIBLE PUMP
1
2
3
4
5
6
7
7. Universal Adaptor
1. UNIVERSAL ADAPTOR
Preparing the Universal Adaptor
To fit a 25mm (1’’) rigid pipe or flexible tubing
To fit a 25mm (1’’) tap adaptor
(temporary application only)
To fit a 32mm (1¼’’) rigid pipe or flexible tubing
Fitting the Universal Adaptor
No cutting of the universal
adaptor is required. It is ready
to be fitted with a 25mm (1’’)
rigid pipe or flexible tubing (not
included).
1. Ensure the O-ring is fitted to the
pump outlet.
2. Screw the universal adaptor
onto the pump outlet.
The universal adaptor is designed to fit various sizes of pipes and fittings.
Cut the universal
adaptor using a
hack saw and then
screw on the 25mm
(1”) tap adaptor.
Cut the universal
adaptor using
a hack saw. It is
now ready to be
fitted with a 32mm
(1¼’’) rigid pipe or
flexible tubing (not
included).
WARNING:
ENSURE ThE TOOL IS SWITChED OFF AND
DISCONNECTED FROM ThE POWER SUPPLY BEFORE
PERFORMING ANY OF ThE FOLLOWING ASSEMBLY.
