![EINHELL ETH 2000 Original Operating Instructions Download Page 13](http://html1.mh-extra.com/html/einhell/eth-2000/eth-2000_original-operating-instructions_2370952013.webp)
GB
- 13 -
10. Troubleshooting
If the equipment is operated properly you should experience no problems with malfunctions or faults.
In the event of any malfunctions or faults, please check the following before you contact your customer
services.
Fault
Possible cause
Remedy
Equipment does not
work
Power plug is not connected
The topple cut-out has triggered
Connect the power plug
Place the machine on a level surface
The equipment
does not heat
The thermostat control is set too low
Overheating guard has been triggered
The switch is set to blowing without
heating function.
Turn the thermostat control to the
right, to a higher temperature
Please note section 6.3
Set the heating function
Anl_ETH_2000_SPK7.indb 13
Anl_ETH_2000_SPK7.indb 13
17.02.2017 07:53:51
17.02.2017 07:53:51