EINHELL BG-BC 25 S, Original Operating Instructions

Page: 24 / 160

4. Intended use
The equipment is designed for cutting lawns and
grassed areas. The operating instructions as supplied
by the manufacturer must be kept and referred to in
order to ensure that the equipment is properly used
and maintained. Any use which is not expressly
permitted in the manual may result in damage to the
equipment and place the user in serious danger. Be
sure to observe the restrictions in the safety
instructions.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
equipment is used in commercial, trade or industrial
businesses or for equivalent purposes.
Important. Due to the high risk of bodily injury to the
user, the petrol power scythe must not be used to
carry out the following work: to clean dirt and debris
off walkways, or to chop up tree or hedge clippings.
Moreover, the petrol power scythe may not be used
to level out high areas such as molehills. For safety
reasons, the petrol power scythe may not be used as
a drive unit for other work tools or toolkits of any kind.
The equipment is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user/operator and not the manufacturer
will be liable for any damage or injuries of any kind
caused as a result of this.
5. Technical data
Engine type
2-stroke engine, air-cooled, chrome cylinder
Engine power (max.) 0.75 kW (1 HP)
Displacement 25 ccm
Idle speed of engine 3,000 min
-1
Max. engine speed 10,500 min
-1
Max. torque
Scythe: 9,500 min
-1
Trimmer: 8,000 min
-1
Ignition Electronic
Drive Centrifugal clutch
Weight (with empty tank) 6.2 kg
Long handle length 132 cm
Cutting line diameter 43 cm
Cutting circle diameter of blade 23 cm
Cutting line length 4 m
Cutting line diameter: 2.5 mm
Tank capacity 0.45 l
Spark plug L8RTC
Sound and vibration
Sound pressure level L
pA
98.2 dB(A)
Uncertainty K
pA
3 dB
Sound power level L
WA
112 dB(A)
Uncertainty K
WA
3 dB
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Idle speed
Vibration emission value ah = 4.01 m/s 2
K uncertainty = 1.5 m/s
2
Functions
Vibration emission value ah = 9.14 m/s
2
K uncertainty = 1.5 m/s
2
Reduce noise generation and vibration to a
minimum!
Use only equipment that is in perfect condition.
Maintain and clean the equipment regularly.
Adopt your way of working to the equipment.
Do not overload the equipment.
Have the equipment checked if necessary.
Switch off the equipment when not in use.
Wear gloves.
6. Before starting the equipment
6.1 Assembly
6.1.1 Fitting the steady grip
Install the steady grip as shown in Figures 3a-3c. Do
not tighten the screws until you have set the perfect
working position with the carrying strap. The steady
grip should be aligned as shown in Figure 1. To
dismantle, proceed in reverse order.
6.1.2 Fitting the long handle (Fig. 4a-4c)
Slide the spacer sleeve (Fig. 4a / Item 23) between
the two screw holes (B). Insert the connecting screw
(22) through the holes and the spacer sleeve as
shown in Figure 4b. Screw the handle screw (Fig. 4b /
20
GB
Anleitung_BG_BC_25_S_SPK7:_ 19.07.2010 8:35 Uhr Seite 20