5. Insert outer flange and tighten with spanner.
6. If necessary, adjust wheel guard to appropriate position.
7. Install side handle on either side of grinder by turning handle clockwise (Fig.4)
Operation
This heavy-duty grinder is designed for the following uses:
•
Removal of casting fin and finishing on various types of steel, bronze and aluminum
materials and castings.
•
Beveling and finishing weld seams.
•
Grinding of welded sections cut by means of welding.
•
Grinding of synthetic resins, brick, marble, etc.
•
Cutting thin wall tubes and small size metal materials.
For proper operations
1. Be sure power plug is firmly inserted into wall receptacle or extension cord.
2. Firmly hold grinder with one hand and push ON/OFF switch forward to start.
3. Grinding should be done at about 30
º
for roughing and about 15
º
for finishing. (Fig.5)
4. Use side handle to help steady tool and assist movement.
5. Slide ON/OFF switch toward the rear to stop grinder when finished.
6. Avoid overloading the machine for a long time.
OUTER
FLANGE
INNER
FLANGE
