GB
- 24 -
10. Troubleshooting guide
Fault
Possible causes
Recti
fi
cation
Motor does not start a) No electricity in plug
b) Cable defective
c) Switch, switch/plug block
defective
d) Connections to motor or
capacitor disconnected
e) Housing clogged
a) Check line and fuse
b) Check
c) Have machine checked by a
customer service center
d) Have machine checked by a
customer service center
e) If necessary adjust working depth.
Clean housing so that the roller can
run freely
Engine performance
drops
a) Soil is too
fi
rm
b) Housing clogged
c) Roller badly worn
a) Change working depth
b) Clean housing
c) Replace
roller
Imprecise scarifying
result
a) roller worn
b) Wrong working depth
a)
Replace roller
b) Correct working depth
Motor is running,
roller is not
rotating
a) Toothed belt is torn
a) By customer service workshop
Important notice! To protect the motor itis equipped with a thermal overload switch which cuts
out when overloaded and starts again automatically after a short cooling-down period.
Anl_GE_SA_1435_1_SPK13.indb 24
Anl_GE_SA_1435_1_SPK13.indb 24
28.06.2022 08:53:04
28.06.2022 08:53:04
