GB
- 30 -
11. Troubleshooting
Fault
Possible causes
Remedies
The motor fails to
start
a) Motor terminals disconnected
b) The mower is standing in high
grass
c) The mower housing is clogged
d) Safety switch is not inserted
e) Battery is not correctly inserted
a) Have repaired by the Customer
Service Center
b) Start in low grass or on an area
that has already been mowed;
change the cutting height if neces-
sary
c) Clean the housing so that the bla-
de moves freely
d) Insert safety switch (see 6.)
e) Remove the battery and reinsert
(see 5.)
The motor perfor-
mance drops
a) The grass is too high or too damp
b) The mower housing is clogged
c) The blade is severely worn
d) Battery performance decrea-
sing
a) Correct the cutting height
b) Clean the housing
c) Replace the blade
d) Check the battery performance
and charge the battery if necessa-
ry (see 5.)
Cutting is irregular
a) The blade is worn
b) Wrong cutting height
a) Replace or resharpen the blade
b) Correct the cutting height
Motor stops sud-
denly
a) Battery is overloaded
b) Battery is empty
a) Switch the equipment o
ff
and on
again. If this happens often, use a
battery with higher capacity (Ah)
b) Use a charged battery
Anl_GE_CM_36_37_Li_SPK9_1.indb 30
Anl_GE_CM_36_37_Li_SPK9_1.indb 30
18.02.2021 12:28:22
18.02.2021 12:28:22