Important!
When using the equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating instructions and
safety regulations with due care. Keep this manual in
a safe place, so that the information is available at all
times. If you give the equipment to any other person,
hand over these operating instructions and safety
regulations as well. We cannot accept any liability for
damage or accidents which arise due to a failure to
follow these instructions and the safety instructions.
1. Safety regulations
The corresponding safety information can be found
in the enclosed booklet.
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety regulations
and instructions may result in an electric shock, fire
and/or serious injury.
Keep all safety regulations and instructions in a
safe place for future use.
Explanation of the warning notice (see Figure 4)
on the grass trimmer
1: Caution!
2: Wear safety goggles!
3: Protect from the damp!
4: Read the directions for use before putting into
operation for the first time!
5: Keep third parties away from the danger zone!
6: The tool runs on after being switched off!
2. Layout and items supplied (Fig. 1-3)
1. Rechargeable battery (14.4 volts)
2. On/Off
switch
3. Safety
switch
4. Front
grip
5. Turning motor unit
6. Line
spool
7. Safety
guard
8. Power supply unit
9. Charging
adapter
10. Guide bar
11. Two screws for guide bar
12. Two screws for the safety guard
3. Proper use
The trimmer is designed for cutting lawns and small
areas of grass in private and hobby gardens. Tools
for private and hobby gardens are not suitable for
use in public facilities, parks and sport centers, along
roadways, on farms or in the forestry sector. For the
tool to be used properly it is imperative to follow the
instructions set out in the manufacturerʼs directions
for use.
Important! It is prohibited to use the tool to chop
material for composting because of the potential
danger to persons and property.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Technical data
Speed n
0
:
8500 min
-1
Cutting range:
25 cm diameter
Max. running period:
approx. 25 min
Nylon cutting line Ø
1,2 mm
Type of protection:
III
Sound power level L
WA
:
94 dB(A)
Sound pressure level L
pA
:
78 dB(A)
Replaceable NC battery:
14,4 V d.c.
Front handle vibration a
hv
: 3.71
m/s
2
Rear handle vibration a
hv
: 5.73
m/s
2
Power supply unit:
Mains voltage:
230 V ~ 50 Hz
Output:
Rated voltage:
18 V d.c.
Rated current:
400 mA
The noise level of this machine may exceed 85
dB(A). In this case, noise protection measures need
11
GB
Anleitung_RG_CT_14_SPK1:_ 30.07.2008 9:58 Uhr Seite 11
Summary of Contents for 34.111.01
Page 4: ...4 5 6 7 8 9 4 1 2 3 5 6 4 4 A C 5 B Anleitung_RG_CT_14_SPK1 _ 30 07 2008 9 58 Uhr Seite 4 ...
Page 5: ...5 10 11 12 13 14 15 B C A A A Anleitung_RG_CT_14_SPK1 _ 30 07 2008 9 58 Uhr Seite 5 ...
Page 6: ...6 16 17 18 B A 12 cm E D C 19 20 21 Anleitung_RG_CT_14_SPK1 _ 30 07 2008 9 58 Uhr Seite 6 ...
