Einhell Royal 34.015.80, Directions For Use Manual

Page: 12 / 60

contacts and the coupling must be rain-water-
protected.
앬 Keep cables and other objects out of the area
you want to cut.
앬 If you have to lift the grass trimmer to move it,
switch off the motor and wait for the rotating tool
to stop. Before you leave the trimmer, switch off
the motor and pull out the power plug.
앬 Before you connect the grass trimmer to the
power supply, make sure that none of its moving
parts are damaged and that the line spool is
correctly inserted and fastened.
앬 Never cut against hard objects when using the
grass trimmer. This is imperative to avoid
causing injury to the user and damage to the
trimmer.
앬 Use only original replacement parts for repair
and maintenance purposes.
앬 Have repairs carried out only by a qualified
electrician.
앬
Examine the grass trimmer for signs of wear or
damage each time before you use it and after
any collisions. Have essential repairs carried out
without delay.
앬
Always keep your hands and feet away from the
cutting mechanism, particularly when you switch
on the trimmer.
앬
After pulling out new line, always return the
trimmer to normal working position before you
switch it on again.
앬
Never use replacement parts or accessories
which are not foreseen or recommended by the
manufacturer.
앬
Pull out the power plug before carrying out any
inspection, cleaning or other work on the trimmer
and whenever it is not being used.

Caution! The nylon line will run on for a few
seconds after the tool is switched off!
3. Explanation of rating plate
(see picture 2) on the grass trimmer
Item 1: Important! Read the operating instructions
carefully before you use the hedge trimmer.
Item 2: Wear goggles and a face mask.
Item 3: Never use the grass trimmer in the rain, in
damp conditions or on wet lawns.
Item 4: Keep a safe distance of at least 5m from
other persons.
Item 5: Using the grass trimmer as an edge cutter.
4. Technical data
앬 Voltage 230V ~ 50 Hz
앬 Power rating 550 W
앬 Cutting width ø 30 cm
앬 Speed 10,000 rpm
앬 Nylon cutting line ø 1.2 mm
앬
Sound pressure level LPA 76 dB(A)
앬 Sound power level 96 dB(A)
앬 Vibration aw
≤
2,5 m/s 2
앬 Weight 3 kg
The noise level of this machine may exceed 85
dB(A). In this case, noise protection measures need
to be introduced for the user. The machine’s noise
was measured in accordance with IEC 59 CO 11,
IEC 704, DIN 45635 Part 21, NFS 31-031
(84/538/EEC).
The level of vibrations emitted from the handle is
1.2 m/s
2 . Measurements were taken in accordance
with ISO 5349.
5. Assembling the guard hood and the
handle
앬 Plug the guard hood on the motor head and
fasten with the supplied screws (see Figure 3).
앬 First fasten the screws shown in Figure 4, then
you can fasten the two screws in conjunction
with the edge guide (see Figure 5).
앬 Fit the handle as shown in Figure 6.
6. Proper use
The trimmer is designed for cutting lawns and small
areas of grass in private and hobby gardens.
Tools for private and hobby gardens are not suitable
for use in public facilities, parks and sport centers,
along roadways, on farms or in the forestry sector.
For the tool to be used properly it is imperative to
follow the instructions set out in the manufacturer’s
directions for use.
Important! It is prohibited to use the tool to chop
material for composting because of the potential
danger to persons and property.
7. Before starting
You can adjust the height of the grass trimmer and
the position of the auxiliary handle to obtain the
optimal working position.
GB
12
Tool runs
on!
Anleitung RTV 550-1 SPK7 18.01.2006 10:12 Uhr Seite 12