Important!
When using equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating manual with due
care. Keep this manual in a safe place, so that the
information is available at all times. If you give the
equipment to any other person, give them these
operating instructions as well.
We accept no liability for damage or accidents which
arise due to non-observance of these instructions
and the safety information.
1. Safety information
쎲
Important: Read the operating instructions before
assembling and using the appliance for the first
time.
쎲
Check that the mains voltage is the same as the
mains voltage specified on the rating plate.
쎲
Only connect the appliance to a properly fitted
220 V, ~ 60 Hz shock-proof socket.
쎲
Minimum 10 A fuse.
쎲
Pull out the power plug in the following
circumstances: Whenever the appliance is not in
use, before opening the appliance and before all
cleaning and maintenance work.
쎲
Never clean the appliance with solvents.
쎲
Never pull the plug out of the socket by pulling the
cable.
쎲
Never leave the appliance unattended when
operational.
쎲
Keep away from children.
쎲
Take care to ensure that the power cable does
not get damaged by being run over, crushed,
pulled or suchlike.
쎲
Do not use the machine if the power cable is in a
less than perfect condition.
쎲
If the power cable has to be replaced, the
replacement must comply with the design
specifications of the manufacturer. Power cable:
H 05 VV - F 2 x 1.0 mm
2
쎲
Never vacuum the following: Burning matches,
smoldering ash and cigarette butts, combustible,
caustic, inflammable or explosive substances,
vapor or liquids.
쎲
This appliance is not suitable for vacuuming dust
which can be harmful to health.
쎲
Store the appliance in a dry indoor location.
쎲
Never use the appliance if it is damaged.
쎲
Only allow the appliance to be serviced by an
authorized after sales service outlet.
쎲
Only use the appliance to carry out work for which
has been designed.
쎲
Take extra care when cleaning steps.
쎲
Use only genuine accessories and spare parts.
Keep children and other persons away
from the electric tool while it is being
used.
Allowing yourself to get distracted can
cause you to lose control of the tool.
Always pull the plug out of the socket
outlet before making any adjustments.
Exchange accessory parts or put away the
tool.
This precaution eliminates the possibility of
inadvertently starting the tool.
When not in use, store electric tools out of
the reach of children. Do not allow those
persons to use this tool who are
unfamiliar with it or who have not read
these instructions.
Electric tools are dangerous when they are
used by inexperienced persons.
If the power cable of the electric tool is
damaged, it must be replaced by a
specially prepared connection lead which
can be obtained from the customer
service center.
2. Layout and items supplied (Fig. 1)
1 Handle
2 ON/OFF
switch
3 Head
4 Filter
basket
5
Safety float valve
6
Vacuum tube holder
7 Locking
hook
8 Tank
9 Hose
connector
10 Blow connector
11 Flexible hose
12 Accessory holder
13 Dual purpose nozzle
14 Castors
15 Pleated filter
16 Foamed plastic filter
17 Handle with air regulator
18 Automatic cable rewind
19 Storage compartment
20 Vacuum tube
21 Crevice nozzle
22 Cushion nozzle
23 Dirt bag
GB
5
Anleitung_NTS_1500_SPK7:_ 23.11.2007 10:36 Uhr Seite 5
