6
Installation
1. Insert the gooseneck connector in the stand XLR connector. Ensure when
introducing the gooseneck
to hear a “click” and to make reference to the
following illustration.
2. Connect the call station microphone to the amplifier throughout the following
cable (XLR male/XLR female).
3. Set ON position for Mixer/Amplifier phantom alimentation.
4. Pressing the microphone stand key, the screen led show ON and it is
possible to make announcements. The following key pressing disable the
microphone stand and the screen led show OFF.
5. To disconnect the gooseneck microphone, keep strongly the stand, low the
tang (illustrated in below figure) and extract the microphone.
