Eikon AETHER RM1, User Manual

Page: 9 / 32

9
VOLUME AUDIO RECEIVER: press the "SET" button for two seconds, the icon disappears press the
button to select the output level desired.
AUTO SCAN: press the "SET" button for two seconds, the icon disappears press the button AUTO, icon
AUTO flashing, the receiver scrolls all the channels in select group to find a free one and selects the best.
Please note that when you have more than one RM1 systems to set up, you must leave ON any transmitter
you have already set up and synced with its receiver, except the transmitter that you want to set up, which
must be off.
SYNC IR DATA
To synchronize the receiver with the transmitter, expose the IR sensor by bringing it closer to the receiver's
IR DATA SYNC window. Press the ASC button, the IR icon will start flashing together with the receiver's IR
sensor. After synchronization, the LED will stop flashing. Check that the transmitter shows the same
frequency on the receiver display.
RM1HT HANDHELD MICROPHONE TRANSMITTER
See FIG. 2 at page 25